Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #12

Edit by Cooper

Edit approved by Cooper

Before
After
Unchanged

Step Lines

[* black] Remove the two Phillips #00 screws holding infrom the analog stick, a 'J00' bit works great for this.
[* black] The analog stick ribbon cable is locked into place by a small black switch located on the opposite side the cable is inserted. Take a spudger and carefully flip the switch upwards, then gently remove the ribbon cable
Joystick.
[* black] Remove the two Phillips #00 screws holding infrom the analog stick, a 'J00' bit works great for this.
[* black] The analog stick ribbon cable is locked into place by a small black switch located on the opposite side the cable is inserted. Take a spudger and carefully flip the switch upwards, then gently remove the ribbon cable
Joystick.