Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #12

Edit by Kyler Saunders

Edit approved by Kyler Saunders


Step Lines

[title] Disconnecting the analog stick
[* black] Remove the two screws holding in the analog stick, a 'J00' bit works great for this.
[* black] The analog stick ribbon cable is locked into place by a small black switch located on the opposite side the cable is inserted. Take a spudger and carefully flip the switch upwards, then gently remove the ribbon cable.

Image 1

No previous image


Image 2

No previous image