Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #6

Edit by Taylor Dixon

Edit approved by Taylor Dixon


Step Lines

[* icon_note] Before you perform this step, take note of how the antenna cable and its PCB board are seated for proper reassembly later.
[* black] Carefully de-thread the upper half of the grey antenna cable out of the battery cavity
[* black] Pry up with the pointy end of a Spudger to disconnect the antenna cable's [guide|25629|coaxial connector|stepid=64973] from the motherboard.
[* black] Remove the grey antenna cable.
[* icon_reminder] During reassembly, reconnect the antenna cable, then make sure it is routed through the battery cavity in the midframe as it was before you took it out.

Image 3