Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #4

Edit by Taylor Dixon

Edit approved by Taylor Dixon

Before
After
Unchanged

Step Lines

[* black] Use a spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.
[* icon_caution] Use cautionBe extremely careful while working around the IR sensor cable and vibration motor cable that run close toyou pry up the battery connector. If it does not come up easily, try gently pulling on the wires to disconnect it.
[* icon_caution] Use cautionBe extremely careful while working around the IR sensor cable and vibration motor cable that run close toyou pry up the battery connector. If it does not come up easily, try gently pulling on the wires to disconnect it.