Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #4

Edit by Taylor Dixon

Edit approved by Taylor Dixon

Before
After
Unchanged

Step Lines

[* black] Use a spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.
[* [* icon_caution] Use caution while working around the IR sensor cable and vibration motor cable that run close to the battery connector.
[* [* icon_caution] Use caution while working around the IR sensor cable and vibration motor cable that run close to the battery connector.