Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Insert an Opening Pickopening pick into the seam at the bottom edge of the back panelcontroller (opposite the L and ZL buttons).
[* black] Slowly slide the flat edge of your Opening Pickopening pick up the side of the Joy-Con.
[*

[*
icon_note] Be careful not to slide the Opening Pickopening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.
[* black] Insert an Opening Pickopening pick into the seam at the bottom edge of the back panelcontroller (opposite the L and ZL buttons).
[* black] Slowly slide the flat edge of your Opening Pickopening pick up the side of the Joy-Con.
[*

[*
icon_note] Be careful not to slide the Opening Pickopening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.