Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Taylor Dixon

Edit approved by Taylor Dixon

Before
After
Unchanged

Step Lines

[* black] Insert an Opening Pick into the bottom edge of the back panel (opposite the L and ZL buttons).
[* black] Slowly slide the flat edge of your Opening Pick alongup the edge side of the back panelJoy-Con.
[* black] Slowly slide the flat edge of your Opening Pick alongup the edge side of the back panelJoy-Con.
[* icon_note] Be careful not to slide the Opening Pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.