Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Cooper

Edit approved by Cooper

Before
After
Unchanged

Step Lines

[title]* black] '''Insert an Opening Pick under the Joy-Conlower side of the back panel '''(opposite from the L and ZL buttons).
[* black] Open up'''Slowly slide the backOpening Pick along the left side of the Joy-Con like a book.back panel.'''
[* black] ⚠icon_caution] Be mindful ofcareful not to slide the two fragile ribbon cables attachingOpening Pick too far inside the rails toJoy-Con. This may damage the motherboardinner components. The back panel loosens fairly easily, so not much pressure is needed.
[title]* black] '''Insert an Opening Pick under the Joy-Conlower side of the back panel '''(opposite from the L and ZL buttons).
[* black] Open up'''Slowly slide the backOpening Pick along the left side of the Joy-Con like a book.back panel.'''
[* black] ⚠icon_caution] Be mindful ofcareful not to slide the two fragile ribbon cables attachingOpening Pick too far inside the rails toJoy-Con. This may damage the motherboardinner components. The back panel loosens fairly easily, so not much pressure is needed.