Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Taylor Dixon

Edit approved by Taylor Dixon

Before
After
Unchanged

Step Lines

[* black] '''InsertInsert an Opening Pick underinto the lower sidebottom edge of the back panel '''(opposite from(opposite the L and ZL buttons).
[* black] '''SlowlySlowly slide the Opening Pick along the leftedge side of the back panel.'''panel.
[* icon_cautionicon_note] Be careful not to slide the Opening Pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.
[* black] '''InsertInsert an Opening Pick underinto the lower sidebottom edge of the back panel '''(opposite from(opposite the L and ZL buttons).
[* black] '''SlowlySlowly slide the Opening Pick along the leftedge side of the back panel.'''panel.
[* icon_cautionicon_note] Be careful not to slide the Opening Pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added