Skip to main content

Changes to Step #5

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Once a small gap has been created with the curved blade, remove the blade and insert the thinner edge of an opening tool into the gap.
+[* black] Once you've opened a small gap with the curved blade, remove the blade and insert the thinner edge of an opening tool into the gap.
[* black] Push the opening tool into the gap, using your thumb as a pivot to lift the display open a bit farther.
-[* icon_caution] Do not try to open the display all the way. The Force Touch gasket may stick to either the display or body, and will tear if forced.
+[* icon_caution] Don't try to fully open or detach the display yet.