Skip to main content

Changes to Step #5

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged

Step Lines

-[* black] Once a small gap has been created with the curved blade take the thin side of an opening tool and place the tip on the widened gap as shown in the picture.
-[* black] Now push the opening tool into the gap to lift the display even more.
+[* black] Once a small gap has been created with the curved blade take an opening tool and place the thinner edge on the gap.
+[* black] Push the opening tool into the gap using your thumb as a pivot to lift the display even more.
[* icon_caution] Do not try to open the display all the way. The force touch gasket may stick to either the display or body and may tear.