Skip to main content

Changes to Step #5

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

[* black] Once a small gap has been created with the curved blade take the thin side of an opening tool and place the tip on the widened gap as shown in the picture.
[* black] Now push the opening tool into the gap to lift the display even more.
-[* icon_caution] Do not try to pen the display all the way. The force touch gasket may stick to either the display or body and may tear.
+[* icon_caution] Do not try to open the display all the way. The force touch gasket may stick to either the display or body and may tear.