Skip to main content

Changes to Step #9

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Use an opening pick to lever out the antenna cable assembly in three separate actions.
[* icon_caution] Do not
the areas shown.
[* icon_caution] Don't
slide the opening pick from one side to the otherside, because there are two display cables that can be damaged.
[* black] Insert the opening pick beneath the right side of the antenna cable assembly and lever it out. Pull it out and repeat the procedure in the middle between the two display cables. Repeat once more on the left side of the assembly.
[* black] Use an opening pick to lever out the antenna cable assembly in three separate actions.
[* icon_caution] Do not
the areas shown.
[* icon_caution] Don't
slide the opening pick from one side to the otherside, because there are two display cables that can be damaged.
[* black] Insert the opening pick beneath the right side of the antenna cable assembly and lever it out. Pull it out and repeat the procedure in the middle between the two display cables. Repeat once more on the left side of the assembly.