Skip to main content

Changes to Step #9

Edit by Claire Rapp

Edit approved by Claire Rapp

Deleted
Added
Unchanged

Step Lines

[* black] Use an opening pick to lever out the antenna cable assembly in three separate actions.
[* icon_caution] Do not slide the opening pick from one side to the other because there are two display cables that can be damaged.
[* black] Insert the opening pick beneath the right side of the antenna cable assembly and lever it out. Pull it out and repeat the procedure in the middle between the two display cables andcables. Repeat once more on the left side of the assembly.
[* black] Insert the opening pick beneath the right side of the antenna cable assembly and lever it out. Pull it out and repeat the procedure in the middle between the two display cables andcables. Repeat once more on the left side of the assembly.