Skip to main content

Changes to Step #7

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Carefully disconnect the three antenna coax cables by prying them '''straight up''' from the logic board withboard.
[* black] Slide
your tweezerstweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.
[* icon_reminder] To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place
.
[* black] Carefully disconnect the three antenna coax cables by prying them '''straight up''' from the logic board withboard.
[* black] Slide
your tweezerstweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.
[* icon_reminder] To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place
.