Skip to main content

Changes to Step #4

Edit by Noah

Edit approved by Noah

Before
After
Unchanged

Step Lines

-[* black] One levels are equal, remove synchronization tool and turn engine off
-[* black] Replace Engine cover
+[* black] Now, the idle mixture screws must be adjusted.
+ [* icon_note] It is important that when the screws are adjusted they are adjusted the same amount in the same direction.
+[* black] Turn both screws in, or out an 1/8 or a turn at a time until the fastest idle speed is achieved.
+ [* icon_caution] Before proceeding with this step you should have already checked your [guide|11279|ignition timing], if you have not do it now.