Skip to main content

Changes to Step #5

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* black] Repeat the previous four heating and removal steps for the upper glass panel.
[* icon_reminder] During reassembly, remove leftover adhesive from the panels and the rear case. Then clean those areas with high concentration isopropyl alcohol (greater than 90%) and a lint-free cloth. This will ensure proper adhesion of the panels.
-[* icon_reminder] Reinstall the panels using a precut adhesive strip or a high-bond double-sided tape, such as [product|IF317-072|Tesa 61395|new_window=true].
+[* icon_reminder] Reinstall the panels using a [guide|113604|pre-cut adhesive strip|new_window=true] or [product|IF317-072|double-sided tape|new_window=true].