Skip to main content

Changes to Step #5

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

-[* black] Repeat the first four heating and removal steps for the upper glass panel.
-[* icon_reminder] Before reinstalling the glass panels, remove any adhesive on the panels and the rear case. Then clean the adhesion areas on the panels and the rear case with high concentration isopropyl alcohol (greater than 90%) and a lint-free cloth.
- [* black] Reinstall the panels using a precut adhesive strip or a high-bond double-sided tape, such as [product|IF317-072|Tesa 61395|new_window=true].
+[* black] Repeat the previous four heating and removal steps for the upper glass panel.
+[* icon_reminder] During reassembly, remove leftover adhesive from the panels and the rear case. Then clean those areas with high concentration isopropyl alcohol (greater than 90%) and a lint-free cloth. This will ensure proper adhesion of the panels.
+[* icon_reminder] Reinstall the panels using a precut adhesive strip or a high-bond double-sided tape, such as [product|IF317-072|Tesa 61395|new_window=true].