Skip to main content

Changes to Step #2

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Insert an opening pick into the small gap between the rear case and the glass panel.
[* icon_note] The gap is very small and the adhesive is very stubborn, so it may help to rock or slide the pick back and forth to work it into the gap. If you're having trouble inserting the pick, go back a step and heat the panel further.
[* icon_caution] The [https://d3nevzfk7ii3be.cloudfront.net/igi/2wP6xDsAlLOtUCUc|charging port is surrounded by plastic|new_window=true]. Do not insert your pick here or pry againstover the [https://d3nevzfk7ii3be.cloudfront.net/igi/2wP6xDsAlLOtUCUc|charging port|new_window=true]. It is framed with plastic part, as it is easy to deform or crackthat can be damaged when prying.
[* icon_caution] The [https://d3nevzfk7ii3be.cloudfront.net/igi/2wP6xDsAlLOtUCUc|charging port is surrounded by plastic|new_window=true]. Do not insert your pick here or pry againstover the [https://d3nevzfk7ii3be.cloudfront.net/igi/2wP6xDsAlLOtUCUc|charging port|new_window=true]. It is framed with plastic part, as it is easy to deform or crackthat can be damaged when prying.
[* black] With tip of the pick under the glass panel, carefully pry upward to slightly separate the rear case and the panel.