Skip to main content

Changes to Step #2

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] Insert an opening pick into the small gap between the frame and the glass panel.
[* icon_note] The gap is very small and the adhesive is very stubborn, so it may help to rock or slide the pick back and forth to work it into the gap. If you're having trouble inserting the pick, go back a step and heat the panel further.
[* icon_caution] The [https://d3nevzfk7ii3be.cloudfront.net/igi/2wP6xDsAlLOtUCUc|charging port is surrounded by plastic|new_window=true]. Do not insert your pick here or pry againsagainst the plastic part, as it is easy to deform or crack.
[* icon_caution] The [https://d3nevzfk7ii3be.cloudfront.net/igi/2wP6xDsAlLOtUCUc|charging port is surrounded by plastic|new_window=true]. Do not insert your pick here or pry againsagainst the plastic part, as it is easy to deform or crack.
[* black] With tip of the pick under the glass panel, carefully pry upward to slightly separate the frame and the panel.