Skip to main content

Changes to Step #4

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged

Step Lines

-[* icon_note] In the next two steps we remove the two coax cables running from the daughter- to the motherboard. If you want to replace your display assembly with frame it is not absolutely necessary to do so. However we advise to remove them to avoid damage or tension on them. If you want to replace one of the boards, at least you need to disconnect them.
+[* black] Remove the two coax cables running from the daughterboard to the motherboard.
+ [* icon_note] If you want to replace your display assembly with frame it is not absolutely necessary to remove the coax cables. However we advise to do so to avoid damage or tension on them.
[* black] Use a pair of tweezers to carefully disconnect both ends of the white coax cable and remove it.