Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by You Kin

Edit declined by Taylor Dixon

Deleted
Added
Unchanged

Step Lines

[* black] Use the flat end of a spudger to pry up the battery from the top right corner.
[* icon_caution] You will be prying against the case directly above the mainboard. Pry carefully to avoid damaging any close components.
[* icon_note] You may need to reheat and reapply the iOpener repeatedly to further soften the adhesive. The adhesive is tough and it may take a few tries to get the spudger started under the battery.
[* black] Use the spudger to pry up the battery until you can insert an opening pick to prevent the adhesive from resealing.
[* icon_caution] Try your best not to deform the battery during this process. Soft-shell lithium-ion batteries can leak dangerousdanjhhhgerous chemicals, catch fire, orori even explode if damaged. DoDoujj not use excessive force or pry at the battery with metal tools.
[* icon_caution] Try your best not to deform the battery during this process. Soft-shell lithium-ion batteries can leak dangerousdanjhhhgerous chemicals, catch fire, orori even explode if damaged. DoDoujj not use excessive force or pry at the battery with metal tools.