Skip to main content

Fix Your Stuff

Right to Repair


Changes to Step #2

Edit by oldturkey03

Edit approved by oldturkey03


Step Lines

[* black] Check if the stamp is stuck. If it is it will be necessary to free it.
[* red] Look at the seal: is there a deep circular groove pressed into it? If so then it is possible that it does not close properly anymore.
[* black] The whole valve can be replaced with a new one.
[* black] It is also possible tho gently pry out the seal with a needle and then turn it over. The back of the seal will seal properly if it is flat and smooth. Picture two and three show the front and back.