Changes to Step #2
Edit by Arielle Sampson —
Edit approved by Arielle Sampson
- Before
- After
- Unchanged
Step Lines
| + | [* black] Apply several drops of isopropyl alcohol to the black chip installed on the motherboard. |
|---|---|
| + | [* icon_note] Isopropyl alcohol is used to help dissolve flux when micro-soldering. It allows the user to scrub flux off of the logic board. The alcohol will evaporate and helps clean off the logic board without leaving water or other corrosive elements. |
| + | [* black] Use tweezers to remove the tristar chip from the logic board. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added