Skip to main content

Changes to Step #17

Edit by duskylite

Edit declined by Yuting Zhao

Before
After
Unchanged

Step Lines

-[* red] Después de la limpieza, no te preocupes por la batería de litio todavía. Conecte la fuente de alimentación y vea si el indicador luminoso está encendido.
-[* orange] La placa base todavía necesita trabajo ya que la luz indicadora no es brillante. Compruebe que la corriente es de unos 6mA. El caso habitual es que el IC de potencia es el problema, ya que es la parte más frágil de la placa.
-[* orange] Retire los componentes dañados, ubique los reemplazos idénticos y vuelva a colocarlos en los mismos lugares. Si no, desoldar y resolver, y ver si funciona. Este paso es para personas con experiencia en soldadura. De lo contrario, consulte mis recomendaciones al final del documento.
+[* red] After cleaning, do not worry about the lithium battery yet. Connect the power supply and see if the indicator light is on.
+[* orange] The motherboard still needs work since the indicator light is not bright. Check that the current is about 6mA. The usual case is that the power IC is the problem, since it is the most fragile part of the board.
+[* orange] ***This step is ++only++ for those with experience in soldering:*** Remove damaged components, locate identical replacements and replace them in the same places. If not, desolder and solve, and see if it works. This step is for people with welding experience. Otherwise, see my recommendations at the end of the document.