Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #9

Edit by David Sylvester

Edit approved by David Sylvester

Deleted
Added
Unchanged

Step Lines

[* black] Lay board facedown on a smooth surface.
[* icon_caution] Do not touch front of the dlp chip. Oils or dust will distort the tv image.
[* red] Use a small flathead screwdriver to turn the locking screw half a turn counterclockwise
[* red] Use a small flathead screwdriver to turn the locking screw half a turn counterclockwise
[* black] Remove DLP chip from the light engine board.
[* black] Photo shows broken DLP chip with hundreds of stuck pixels.