Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #8

Edit by David Sylvester

Edit approved by David Sylvester

Deleted
Added
Unchanged

Step Lines

[* black] Carefully pull the board to expose the two cables that connect to the back of the board.
[* red] Use pliers and tweezers to disconnect the ribbon cable by pulling it straight out of its socket and the data connector from theby holding its tab and pulling it straight back offrom the board.
[* icon_noteicon_caution] Do not let the ribbon cable recede into the light engine.
[* red] Use pliers and tweezers to disconnect the ribbon cable by pulling it straight out of its socket and the data connector from theby holding its tab and pulling it straight back offrom the board.
[* icon_noteicon_caution] Do not let the ribbon cable recede into the light engine.