Skip to main content

Fix Your Stuff

Right to Repair


Changes to Step #13

Edit by Evan

Edit approved by Evan


Step Lines

[* black] On the back of camera, there are seven screws around the opening through which you can see the back of the CCD & lens assembly. I recommend numbering them with a fine-tip Sharpie & putting corresponding numbers on your project mat to keep the screws straight.
[* black] Unplug flash ribbon.
[* black] Remove screws 6 & 7.
[* black] Remove flash unit from camera (be aware that it contains a capacitor which can give you a jolt if you go sticking things into it).