Fix Your Stuff

Right to Repair

Store

Changes to Step #13

Edit by Evan —

Edit approved by Evan

Before
After
Unchanged

Step Lines

[* black] On the back of camera, there are seven screws around the opening through which you can see the back of the CCD & lens assembly. I recommend numbering them with a fine-tip Sharpie & putting corresponding numbers on your project mat to keep the screws straight.title] Remove Flash Unit
[* black] On the back of camera, there are seven screws around the opening through which you can see the back of the CCD & lens assembly. I recommend numbering them with a fine-tip Sharpie & putting corresponding numbers on your project mat to keep the screws straight.title] Remove Flash Unit
[* black] Unplug flash ribbon.
[* black] Remove screws 6 & 7.
[* black] Remove flash unit from camera (be aware that it contains a capacitor which can give you a jolt if you go sticking things into it).

Image 1

No previous image

Added