Skip to main content

Changes to Step #7

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereRemove the front camera and sensor cable assembly.
[* red] A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable.
[* icon_reminder] When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape
.
[* black] Insert wisdom hereRemove the front camera and sensor cable assembly.
[* red] A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable.
[* icon_reminder] When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape
.

Image 2

Old Version

New Version

Image 3

Old Version

New Version