Skip to main content

Changes to Step #5

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Insert wisdom herethe sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera.
[* icon_caution] Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable.
[* black] Pry up to separate the edge of the flex cable from the back of the display
.
[* black] Insert wisdom herethe sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera.
[* icon_caution] Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable.
[* black] Pry up to separate the edge of the flex cable from the back of the display
.