Skip to main content

Changes to Step #2

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereUse a hairdryer or heat gun or [guide|25705|prepare an iOpener|new_window=true] and apply it to the top front of the display for about a minute, in order to soften the adhesive securing the sensors.
[* icon_caution] The sensors in the following steps are fragile. To increase your chances of removing them without damage, repeatedly add more heat as needed. Alternatively, add a drop or two of isopropyl alcohol and let it penetrate under the sensors before you pry them up
.
[* black] Insert wisdom hereUse a hairdryer or heat gun or [guide|25705|prepare an iOpener|new_window=true] and apply it to the top front of the display for about a minute, in order to soften the adhesive securing the sensors.
[* icon_caution] The sensors in the following steps are fragile. To increase your chances of removing them without damage, repeatedly add more heat as needed. Alternatively, add a drop or two of isopropyl alcohol and let it penetrate under the sensors before you pry them up
.