Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Kevin Jones

Edit approved by Kevin Jones

Before
After
Unchanged

Step Lines

[title] Removing the Mic Receivers from the Mic Mesh
[* black] If you look tward the mesh and the circuits you will see that it is held by 4x #0 Phillips screws. Carefully remove these and the entire cap will come from the board. There are 3 sets of wire, 1 per Mic receiver. You will notice that they are pointed sideways making this microphone a side receiver and not a face pointed one.

Image 1

No previous image

Added

Image 2

No previous image

Added