Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

+[* black] Use an opening pick to gently separate the adhered portion of the antenna flex cable from the top surface of the speaker.
+ [* icon_note] This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This makes it easier to separate (and re-adhere) the flex cable safely.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added