Skip to main content

Changes to Step #5

Edit by steve

Edit approved by steve

Deleted
Added
Unchanged

Step Lines

[* black] The latch is on the white case. The tapstabs are on the gray case. You will be pushing the white caselatch AWAY from the gray tabs.
[* black] Put your flat blade to the OUTBOARD side of the white tablatch in the hole. Push INBOARD to pry it OFF of the tabs, pushing down through the hole at the same timetime in order to push the white case off. You'll want to hold the router by the gray if you can.
[* black] As you push the tablatch you'll obviously need to try to pry the two pieces apart like with your fingernail.
[* black] The latch is on the white case. The tapstabs are on the gray case. You will be pushing the white caselatch AWAY from the gray tabs.
[* black] Put your flat blade to the OUTBOARD side of the white tablatch in the hole. Push INBOARD to pry it OFF of the tabs, pushing down through the hole at the same timetime in order to push the white case off. You'll want to hold the router by the gray if you can.
[* black] As you push the tablatch you'll obviously need to try to pry the two pieces apart like with your fingernail.