Skip to main content

Changes to Step #7

Edit by Andrew Bookholt

Pending approval


Step Lines

-[* black] Insert wisdom here.
+[* black] Disconnect the following connectors from the logic board:
+ [* red] Camera/IR board cable.
+ [* orange] Optical drive fan.
+[* icon_note] When removing these connectors, it is helpful to use a spudger or your fingernails to push the ears on either side of the connector toward the top edge of the iMac.
+[* icon_caution] The camera/IR board cable connector is very wide and delicate. Slowly walk the connector out of its socket by pushing either side toward the top of the iMac.

Image 1

Old Version

New Version