Skip to main content

Changes to Step #3

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Disconnect the DC-in cable by simultaneously depressing both locking arms and pulling its connector away from the socket on the logic board toward the top of your iMac.
+[* black] Disconnect the DC-In cable by simultaneously depressing both locking arms and pulling its connector away from the socket on the logic board toward the top of your iMac.
[* icon_note] After both locking arms pass their retaining tabs, it is helpful to push the arms toward the top edge of your iMac while wiggling the connector.

Image 1

Old Version

New Version

Image 2

Old Version

New Version