Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Jake Devincenzi

Edit approved by Jake Devincenzi

Before
After
Unchanged

Step Lines

[* black] Use a plastic opening tool to pry the edge of the home button ribbon cable up from the display assembly.
[* black] Start under the contact points on the right and work to the left.
[* icon_caution] Going left to right may rip your ribbon cable as the contacts are well adhered to the front panel.
[* icon_note] If you have trouble sliding the plastic opening tool under the contact points, flip the tool over and gently push against the right side of the contacts to loosen the adhesive, then try again.