Skip to main content

Changes to Step #11

Edit by Robert Yu

Edit approved by Robert Yu


Step Lines

+[* black] Reassemble the tire assembly. Follow the Steps 1-7 in ***reverse order***.
+ [* black] The caliper mounting bolts and the lug nuts should be very tight.
+[* black] Remove the jackstand. Then lower and remove the floorjack.
+[* icon_caution] CAUTION! : Before driving the car, pump the brake pedal several times in order to push the caliper piston back against the brake pads. If this step is not performed, the car may not brake reliably when first driven. For your safety, this step is highly recommended.

Image 1

No previous image