Skip to main content

Changes to Step #9

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Place one end of the c-clamp jaw over the old pad. Place the other end of the jaw on the rear of the caliper. Tighten the c-clamp to push the piston back into the caliper.
-[* black] CAUTION - This step will push oil back into the Brake reservoir which could overflow depending on whether the level has been topped up or not. Brake fluid will damage a Cars paint work.
+[* icon_caution] This will push oil back into the brake reservoir, which could overflow. This can be wasteful, messy, and damage your car's paint job. Make sure the reservoir isn't topped off.