Skip to main content

Changes to Step #8

Edit by Robert Yu

Edit approved by Robert Yu

Before
After
Unchanged

Step Lines

[* black] Depress the caliper piston.
[* black] The new brake pads are thicker than the old pads. Because of this, the caliper piston protrudes too far out to allow enough clearance for the caliper to be placed over the new pads.
[* black] Place an old brake pad over the caliper piston.
-[* black] Place one end of the c-clamp jaw over the old pad. Place the other end of the jaw on the rear of the caliper. Tighten the c-clamp to push the piston back into the caliper.

Image 2

Deleted

Image 3

Deleted