Skip to main content

Changes to Step #3

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* red] Identify the two mounting bolts on the rear of the caliper.
[* black] Using a 12 mm wrench or socket, remove the two caliper mounting bolts.
+[* black] Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, [https://d3nevzfk7ii3be.cloudfront.net/igi/knDMB6UuPMkjmZWG.full|rotate the caliper up and away from the rotor|new_window=true] to access the brake pads. If you do this, skip the next step.