Skip to main content

Changes to Step #3

Edit by Matthew Lee

Edit approved by Matthew Lee

Before
After
Unchanged

Step Lines

-[* black] Identify the two mounting bolts on the rear of the caliper.
+[* red] Identify the two mounting bolts on the rear of the caliper.
[* black] Using a 12 mm wrench or socket, remove the two caliper mounting bolts.
+[* black] ***Image 3***: The lighting is less than ideal. Are there any better pictures that capture the backside of the caliper when the bolts are being removed?

Image 1

Old Version

New Version