Skip to main content

Changes to this Step

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

-[* black] Remove the magnesium midframe by pulling out all eleven 3.5 mm screws holding the piece down, using a JIS #000 screwdriver.
-[* black] Use the plastic opening tool to pry open the frame from the side.
+[* black] Use the flat end of a spudger to disconnect the battery connector.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Deleted