Skip to main content

Changes to Step #4

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Deleted
Added
Unchanged

Step Lines

[* black] Plug the included sensor-enabled SATA power cable into the wide side of the enclosure's wider SATA portconnector.
[* icon_note] The cable is keyed to connect in only one way. If you can't connect the cable, rotate itit 180°, and try again.
[* black] Plug the included sensor-enabled SATA power cable into the wide side of the enclosure's wider SATA portconnector.
[* icon_note] The cable is keyed to connect in only one way. If you can't connect the cable, rotate itit 180°, and try again.