Skip to main content

Changes to Step #4

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Plug the included sensor-enabled SATA power cable into the enclosure's externalwider SATA port.
[* icon_note] The cable is keyed to connect in only one way. If you can't connect the cable, rotate it, and try again.
[* black] Plug the included sensor-enabled SATA power cable into the enclosure's externalwider SATA port.
[* icon_note] The cable is keyed to connect in only one way. If you can't connect the cable, rotate it, and try again.