Skip to main content

Changes to Step #6

Edit by Will Calligan

Edit approved by Will Calligan

Before
After
Unchanged

Step Lines

[* black] Remove the tape covering the ribbon cable.
-[* black] Use the plastic spudger to flip the black tab up that holds the ribbon cable in place.
-[* black] Pull the ribbon cable away from the base of the laptop.
+[* red] Use the plastic spudger to flip the black tab up that holds the ribbon cable in place.
+[* red] Pull the ribbon cable away from the base of the laptop.

Image 1

Old Version

New Version

Image 2

Old Version

New Version