Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #15

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Continue releasing the adhesive along the bottom of the iPad, pulling the guitaropening pick out far enough to go around the home button, and re-inserting it once the guitar pick is past the home button.
[* icon_note] If the adhesive has cooled too much along the bottom edge, re-microwavereheat the iOpener and reheatto warm the adhesive where you are working.
[* black] Continue releasing the adhesive along the bottom of the iPad, pulling the guitaropening pick out far enough to go around the home button, and re-inserting it once the guitar pick is past the home button.
[* icon_note] If the adhesive has cooled too much along the bottom edge, re-microwavereheat the iOpener and reheatto warm the adhesive where you are working.
[* icon_caution] Do not heat the iOpener more than a minute at a time, and always allow at least two minutes before reheating it.