Skip to main content

Changes to Step #2

Edit by Vinu Weerasinghe

Edit approved by Vinu Weerasinghe

Before
After
Unchanged

Step Lines

-[* black] Use a Phillips #1 screwdriver to remove the four-5mm screws that hold the hard drive enclosure to the PC.
-[* black] Pull the hard drive away from the motherboard and set it aside.
+[* red] Use a Phillips #1 screwdriver to remove the four-5mm screws that hold the hard drive enclosure to the PC.
+[* orange] Pull the hard drive away from the motherboard and set it aside.