Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Elliot Kane

Edit approved by Elliot Kane

Before
After
Unchanged

Step Lines

[* black] Remove the grey scuff guard at the bottom of the PC by applying downward pressure to itpressing down on it, and pulling it away.
[* black] Remove the grey scuff guard at the bottom of the PC by applying downward pressure to itpressing down on it, and pulling it away.
[* black] Lift the hinge and remove the grey rubber tabs on either side of the PC’s model information.
[* red] Remove the two 7.62mm Phillips screws beneath the rubber tabs under the hinge and the four 7.62mm Phillips screws where the scuff guard was removed.
[* orange] Remove the two 4.74mm Phillips screws under the hinge (near the hinge joints) and a 4.74mm Phillips screw under the handle.
[* red] Remove the two 7.62mm Phillips screws beneath the rubber tabs under the hinge and the four 7.62mm Phillips screws where the scuff guard was removed.
[* orange] Remove the two 4.74mm Phillips screws under the hinge (near the hinge joints) and a 4.74mm Phillips screw under the handle.